Task:

1. Translating customer demand into a concept design；

2. Converting the concept design into a specific offer to the customer；

3. First point of contact for the customer relating to the tech

Tasks:

1. Take every precaution to create a safe work environment；

2. Perform IC&T activities on assigned project efficiently and effectively；

3. Lead and be responsible for the IC&T team on si

Task

1. Execute all kinds of administrative work and monitor the compliance of authority regulations for quayside operations with the supervision of quayside coordinator；

2. Prepare and archive qua

Responsibilities （main tasks）：

-Working with Sales department to support on technical/ operation related to acquire new RFQ, new business；

-RFQ management:Clear comminication of MOQ,Lead time an

Qualifications:

- Engineer of management collage diploma；

- 3 years experiences in sourcing；

- Been trained on Project management,Suppliers management, Raw material and product knowledge；

- G

主要负责协助模具设计工程师完成图纸设计工作。能吃苦耐劳，有责任心，应届生皆可。一经录用，待遇从优，公司提供工作餐和五险一金。

The main duties is to help the mold design engineer to finish the drawing.

模具或机械类专业，中专以上文化程度，熟练使用3D和2D设计软件，具有创新和团队精神，有责任心。一经录用，待遇从优，公司提供工作餐和五险一金。

You should be major in mold or mechanical and educated over ju

职位:

1.主要负责批办看样,修改版型；根据资料要求，修正意见对样品进行版型上的修正

Review and modify the samples/pattern（fitting/workmanship etc.）

Provide technical advice and support to factories b

Lean Manufacturing Engineer 精益生产工程师

上班时间：8：30- 17：30

上班地址：厦门火炬高新区新丰路176号（小东山站附近）

Job Responsibility:

1.Directly provide formal and informal training and coac

Quality Engineer 质量工程师

上班时间：8：30- 17：30

上班地址：厦门火炬高新区新丰路176号（小东山站附近）

Job Description:

工作职责：

1.Responsible for the quality planning, control and improvement

自动化工程师（机械方向）

上班时间：8：30- 17：30

上班地址：厦门火炬高新区新丰路176号（小东山站附近）

工作职责：

1.负责开发案件的前期调研、方案评估与制作、设备成本的预估以及投资回报效益计算；

2.对

Job Responsibilities:

1.Process development/improvement, defect analysis, quality/productivity improvement, cost reduction.

负责制程开发及改善，异常分析，质量及产量提升，成本节约项目；

2.Use SolidW

? Provide support to drive site EHS performance including regulatory and Environmental, Health, and Safety Management System （EHS-MS） conformance.

参与推动公司各项EHS工作的开展，确保各事项符合法规

Main Responsibilities:

*Process Establishment, Maintenance and Control

-Determines the test process and optimize test specs / procedures based on that process

-Generates test programs, fixtures an

请点击以下链接进行申请，可让HR第一时间看到您的简历，并获得更多贝莱胜集团的企业信息：

主要职责：

1.生产准备

-开

-General position summary: Responsible for providing engineer support for all aspect of high level assembly products process.

-Supervisory responsibility: Supervises process technicians/Engineers and

Position Description:

Timely compilation, evaluation and approval of technical documentation and technical support for new capability setup.

为公司的新维修能力的建立及时提供技术方面的支援服务和

Job Summary岗位概述:

Staff is of this grade are responsible to carry out workshop maintenance tasks in accordance with approved procedures and work instructions and to notify Assistant Engineer/Senio

Job Summary:

Staff is of this grade are responsible to carry out or supervise workshop component maintenance tasks independently or supervise others doing maintenance tasks in accordance with appro

Job Summary:

Staff is of this grade are responsible to carry out workshop maintenance tasks in accordance with approved procedures and work instructions and to notify Assistant Engineer/Senior Qualif

岗位职责：

1、主导研究增强产品竞争力的结构设计和解决方案，在产品规划和设计早期预见复杂结构技术风险并提供解决方案；

2、主导攻克机械运动、结构相关的疑难问题，提炼原理性结论，形成规范化的设计；

3、负

任职条件Qualification:

- CAAC 维修人员执照

- Diploma or above

- Able to read and write English and Chinese fluently

- Has prior knowledge of aviation regulation

- Has prior knowledge of

任职条件Qualification:

1. Diploma or above, aviation / Chemist trade is preferred.

大专以上学历，航空/化学专业优先。

2. Minimum （3-5） years relevant experiences in MRO NDT.

至少（3-5）年MRO无损

Qualification:

1.Diploma or Degree Holder in Mechanical/Aviation Engineering

5 years working experience in Nacelle MRO environment.

3.Able to command in English both spoken and written is an

任职条件Qualification:

- CAAC Part 66 Aircraft Maintenance License

- Diploma or above

- Able to read and write English and Chinese fluently

- Has basic knowledge of CAAC, FAA & EASA regulation

-

岗位职责：

1.根据客户要求进行健身器材新产品、医疗器材设计或协助设计；

2.制作完整的设计图纸，并能审图，外协外购件首件确认；

3.协助部门经理进行项目资源调配，负责与供应商以及公司各部门沟通，确保项目按

任职要求：1.大中专以上学历，机械设计、模具设计专业或相关专业 2.有3年以上精密加工UG编程经验，精通NC精雕操机者优先；

3.熟悉各种材料、刀具的加工工艺参数；

4.熟练电极拆解工艺，出放电图纸；

5.团队合

Key responsibilities主要工作职责

? Market research on competitors and customers overall

? Develop new customers in Rehab area.

? Creating a relationship with new customers and maintaining contact

Key responsibilities /主要职责

1.Support in designing, implementation and development of products, processes and services.

2.Drawing up, keeping and development of technical documentation （2D and

Key responsibilities:

- Elaboration and realization of the yearly sales plan as well as the sales policy.

- Participation in development of the overall sales activities including strategic as well a