工作内容：

1-Responsible for repair tools maintenance and basic tool down recovering.

2-Tool parts evaluation and purchasing.

3-Taking charge of tool down root cause analysis, continuous-improvemen

Task:

1. Independently make and adjust shop drawings according the drawing manual, on basis of a detailed design

2. Gather signatures on the drawing for approval

3. Deliver the signed drawing （pa

Connector research and development, include but not be limited:

1.Technical communication with customer, confirm customer applications and technical requirements.

2.Translate customer’s requirement

岗位职责：

1、主导研究增强产品竞争力的结构设计和解决方案，在产品规划和设计早期预见复杂结构技术风险并提供解决方案；

2、主导攻克机械运动、结构相关的疑难问题，提炼原理性结论，形成规范化的设计；

3、负

职责描述/Position description

1、 负责电力中压、高压设备制造厂家的环氧树脂绝缘子等产品销售

Responsible for the sales of epoxy resin insulators and other products of power medium voltage and high vol

【Job responsibility】:

1.Lead and direct to set up and operate company quality assurance system to achive the quality goals and meet customer’s requirements, support business grow

2.Manage, overse

任职条件Qualification:

- CAAC 维修人员执照

- Diploma or above

- Able to read and write English and Chinese fluently

- Has prior knowledge of aviation regulation

- Has prior knowledge of

Qualification:

1.Diploma or Degree Holder in Mechanical/Aviation Engineering

5 years working experience in Nacelle MRO environment.

3.Able to command in English both spoken and written is an

任职条件Qualification:

1. Diploma or Degree Holder in Mechanical/Aviation Engineering

2. Good knowledge of Airworthiness regulations （CAAC/FAA/EASA）

3. Good English reading/writing/speaking（Cand

Firmware Engineer（固件工程师）

上班时间：8：30- 17：30

上班地址：厦门火炬高新区新丰路176号（小东山站附近）

Job Description:

工作职责：

1.Response for hardware and software development for EEPROM

工作内容：

1.相关体系的认证及完善 （ISO、GMP、CMMI 等等）；

2.能够主导验厂事项（BSCI验厂、质量验厂）

3.主管技术措施和技术、质量、安全的交底工作；

4.建立完善公司质量培训教材，体系；

5.负责公司产品

制程工程师/Process Engineer（外派墨西哥）

Job Responsibilities:

1.Process development/improvement, defect analysis, quality/productivity improvement, cost reduction.

负责制程开发及改善，异常分析，

1.Being responsible for supplier sourcing and selection for AHSC according to Amphenol Purchasing Procedure and in alignment with AHSC business objectives.

2.Working closely with Engineering and Prod

1.与国内客户直接沟通，与国外同事沟通, 能提供专业的技术进行线缆组件设计和项目管理工作。需要具备基本的信号完整性知识和56G或112G线缆组件产品开发经验。

2.制作成品图纸和零件图纸, 物料清单。

3.与各职能单

PE Assistant Manager PE助理经理

上班时间：8：30- 17：30

上班地址：厦门火炬高新区新丰路176号（小东山站附近）

Job description:

1.Supervise, coach and support process team’s daily work and provide

Mechanical Engineer（机械工程师/工装治具设计工程师）

上班时间：8：30- 17：30

上班地址：厦门火炬高新区新丰路176号（小东山站附近）

Job description:

1.Design new fixtures to improve productivity, effici

1.High speed bulk cable design for 32Gbps, 56Gbps, 112Gbps, 224Gbps and beyond.

负责32Gbps、56Gbps、112Gbps、224Gbps及以上高速线束设计。

2.Raw cable simulation, optimization to meet cable assembly m

NPI Engineer

上班时间：8：30- 17：30

上班地址：厦门火炬高新区新丰路176号（小东山站附近）

Job description:

1.Project management - kick off NPI meeting and leading team to work out samples to prod

Signal Integrity Engineer（SI工程师，信号完整性工程师）

Job description:

1. Work with mechanical engineer to develop cable assembly designs in response to specific customer needs. 根据客户的具体需求

Job Responsibilities:

1.Process development/improvement, defect analysis, quality/productivity improvement, cost reduction.

负责制程开发及改善，异常分析，质量及产量提升，成本节约项目；

2.Use SolidW

Assist the Engineering superior with general hotel and building maintenance and ensure that work is completed to a high standard within your established trade which meets the needs and expectations of

Main Responsibilities:

*Process Establishment, Maintenance and Control

-Determines the test process and optimize test specs / procedures based on that process

-Generates test programs, fixtures an

Main Responsibilities:

Perform Effective Supplier Audit

1. Define audits and surveys to ensure that all suppliers are meeting our business requirements to include flow down and quality standards

2.

1.运用综合维修技能

Apply comprehensive maintenance skills

2.能与其他工种相互配合进行员工宿舍的维修，客房维修保养，公区维修保养，设备维修保养等工作。定期巡回检查所管范围设施的完好状况，发现问题及时维

1.确保酒店中央空调、给排水系统、污水排放系统、生活水泵房系统、泳池设备系统、锅炉系统、厨房机修设备和所有水过滤器、洗衣房设备、机修工作间和机修仓库等正常运行，确保负责的区域设施设备和机房卫生干净整洁无

Perform FPA, IQC, IPQC or PSI as assigned, to assure that products shipped meet the requirements stated company’s Product specifications and QA Plan. Conduct factory audits （QMS Audit, Social Compli

Responsibilities:

1．Responsible for internal high-speed and wireharness cable assembly design.

负责内部高速和线束电缆组件设计。

2．To provide product proposal, drawing, quotation, sampling, EBOM,

岗位职责：

1.负责机器学习、神经网络、深度学习、Transformer、GPT等机器学习相关算法的研发、实现和优化，搭建算法库；

2 负责深度分析挖掘现有系统的业务数据、结合行业数据，搭建业务模型，为业务决策提供依据

Job Description:

1．High-speed connector mechanical related 3D design and 2D drawing, ME simulation

2．Finish SI simulation cooperation with SI engineer

3．Do DFMEA and define the whole schedule of

工作职责:

1、制程改善、成本节约及异常处理:

1）制程改善:负责生产量产现场制程工艺相关的改善与评估（WI、图纸、工治具、人员培训、设备、物料、工艺）

2）新工艺新方法新物料验证，出验证报告

3）CIP:作为项